AMT Datasouth Accel-7350 Guía de usuario

Accel-7350 24-Pin Dot Matrix Printer User’s Guide Document Number: 130013

Chapter 1 3. Fit the holes in the ribbon attachment to the right and left projections on the print head. Make sure that the ribbon is pro

Chapter 1 • Setting up the front Paper Rack & Rear Tractor Assembly • The tractor can be installed in front or rear side; 1. Attach the paper ra

Chapter 1 4. Move both paper guides to the right & left end. 5. Insert the connector on the tractor assembly to the mating connector o

Chapter 1 7. Slide the paper path lever to the symbol or the position of "AUTO". The lever position should be at "AUTO" when usi

Chapter 1 9. Perform a trial print sample after connecting the printer to the computer. Adjust the tractors left or right to align the left print mar

Chapter 1 • Setting up the Manual cut sheet 1. Attach the paper rack holders (right & left) and the paper rack. Refer to Chapter 1, “Installing

Chapter 1 3. Slide the paper path lever to the appropriate symbol, or the "AUTO" position. The lever position should be at "AUTO"

Chapter 1 5. Insert a cut sheet paper straight along the paper guide. If paper is inserted slightly skewed, the printer detects it, and adjusts the p

Chapter 1 • Setting up the Front tractor 1. Attach the paper rack holders (right & left) to the printer as shown below. Place the bottom of the

Chapter 1 4. Vertically attach the paper rack to the holders as shown below. 5. Both tractors can be moved right and left to meet the

CONTENTS  Chapter 1 - Setting up the printer  FCC Statement ………………………………………………………… 3  Copyright Declaration ………………………………………………… 4  Safety P

Chapter 1 6. Lower the paper rack down and then press the paper rack securely onto the paper rack holders. 7. Slide the paper path le

Chapter 1 8. Specify the page length. Menu Item 6 PAGE LGTH FRONT TR Check the fanfold paper size marked on the package. 9.Perform trial printing

Chapter 1 • Setting up the CUT SHEET FEEDER (optional) 1. Attach the paper rack holder (right & left) and the paper rack. 2. Move both paper gu

Chapter 1 4. Attach the cut sheet feeder to the back of the printer. 5. Shuffle the paper as show below. Use

Chapter 1 6. Set the CSF release levers to the front to release the paper bin. 7. Set the paper guide lock lever to the “Release” pos

Chapter 1 8. Set the CSF release levers to the back to close the paper bin. 9. Slide the paper path lever to the symbol or the positi

Chapter 1 10. Perform trial printing after connecting the printer to the computer. In case of vertical offset, the printing position should be adj

Chapter 1 • Installing the printer driver Windows 2000 Installation: 1. Select the desired driver provided on the CD shipped with your printer. 2.

Chapter 2 • Control Panel The liquid crystal display (LCD) on the control panel displays the processing conditions of the printer and the setting of

Chapter 2 2. Function keys 1. ONLINE Press the ONLINE key to change the printing enabled (online) state and printing disabled (offline) state.

CONTENTS  Chapter 5 - Troubleshooting  How to solve the problem ……………………………………………. 38  Printing speed is slow ………………………………………………. 38  Printing

Chapter 2 Page 29 of 46 6. ENTER The setting are saved by pressing the ENTER key. 7. ALT The following functions are executed by

Chapter 2 Page 30 of 46 9. EJECT/LOAD ●If the EJECT/LOAD key is pressed when fanfold paper is loaded, the paper is fed back to the parking posit

Chapter 2 3. LCD Current paper path and the User No. are displayed. Front tractor Manual/Cut Sheet Rear tractor Cut Sheet Fee

Chapter 2 4. Lamps (LED Indicators) ON: Printing is enabled. ONLINE (Green) OFF: Printing is disabled. Blinking: The cover is open, or the print

Chapter 2 • Paper path lever The lever for changing the paper path. Position Paper path Front tractor FManual/Cut Sheet Rear tractor Cut

Chapter 2 • Head adjustment lever 71 AUTOThis lever is for adjusting the gap between the print head and the paper. The lever position shoul

Chapter 3 • How to use the setup modes The printer has setup modes, i.e., function setting modes that are unique to this printer. The setup modes ena

Chapter 3 2. Setting example The following is the example to change the page length of fanfold paper from 11 to 8 inch. 1. Press the MENU key while

Chapter 4 • How to use set Power Up User Format This printer has a total of 6 User Formats. Various SETUP Modes as described in Chapter 3.1 & 3.2

Chapter 5 • How to solve the problem 1. Printing speed is slow. Push the key SPEED and select the mode High-speed. LQ NORMAL HIGH 2 DRAFT 2

Chapter 1 Page 3 of 46 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: FCC Class B (1) Th

Chapter 5 5. The message PAPER JAM appears, though paper is not jammed. The paper jam sensor may not function properly if the sensors on the tractors

Chapter 5 9. Unexpected printing results. A gap occurs between the print start position and the top end of paper.  Adjust the gap by setting #2 - #5

Chapter 5 2. Operational error message • The print head is being cooled to prevent it from overheating. The ONLINE lamp blinks. The print head has

Chapter 5 A paper jam occurs at the front tractor. Pull the ejected paper outward gently and press the ONLINE key to restart printing. When the PAP

Chapter 5 Page 43 of 46 • This error occurs if the printer detects that a cut sheet paper is manually loaded with excessiveskew. • The ERROR lamp b

Chapter 6 Page 44 of 46 • Printer specifications Printing Method Serial impact dot matrix Print Head 24pin Maximum column 136 columns (10c

Chapter 6 • Other specifications Power supply AC 120 V, 60Hz (USA and Canada) AC 220-240V, 50-60Hz (Europe and Asia) Power consumption Draft

AMT Datasouth Corporation 803 Camarillo Springs Road, Suite #D Camarillo CA, 93012 1-800-215-9192 Page 46 of 46

Chapter 1 Page 4 of 46 Copyright Declaration Information in this manual is subject to change without notice and does not represent a commitment on the

Chapter 1 Page 5 of 46 Safety Cautions Safety Cautions Do not touch the print head immediately after printing b

Chapter 1 Page 6 of 46 •Unpacking the printer * The packing style is subject to change without notice.

Chapter 1 Page 7 of 46 • Connecting the printer to the power source • Make sure that the power switch is set to off. Connect the printer with the supp

Chapter 1 • Installing the ribbon cassette 1. Turn off the power. Open the front cover. Move the print head to the left end position. C