AMT Datasouth Fastmark M6 PLUS Series Guía de usuario descargar pdf (Pagina 70)

4.2 Printer Function

1. Select the PC interface connected with bar code printer.

2. Click the “Printer Function” button to setup.

3. The detail functions in the Printer Function Group are listed as below.

Function Description

Calibrate Sensor

Calibrate the sensor specified in the Printer Setup

group media sensor field

Ethernet Setup

Setup the IP address, subnet mask, gateway for

the on board Ethernet

RTC Setup Synchronize printer Real Time Clock with PC

Print Test Page Print a test page

Reset Printer Reboot printer

Factory Default

Initialize the printer and restore the settings to

factory default.

Dump Text To activate the printer dump mode.

Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program

Configuration Page Print printer configuration

Password Setup Set the password to protect the settings

The factory default settings are listed as below.

Parameter Default setting

Speed

203dpi: 5 IPS (127 mm/sec)

300dpi: 3 IPS (76.2 mm/sec)

Density

Label width

4.00” (101.6 mm)

Label height

4.00” (101.6 mm)

Sensor type

Gap sensor

Gap setting

0.12” (3.0 mm)

Print direction

Reference point

0,0 (upper left corner)

Offset

Print mode

Batch mode

Serial port settings

9600 bps, none parity, 8 data bits, 1 stop bit

Code page

850

Country code

001

Clear flash memory



1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 82 83

Comentarios a estos manuales

Sin comentarios

AMT Datasouth Fastmark M6 PLUS Series Guía de usuario Pagina 70

Comentarios a estos manuales

Relacionado con productos y manuales para Lectores De Códigos De Barras AMT Datasouth Fastmark M6 PLUS Series