AMT Datasouth Fastmark M4 Series Guía de usuario descargar pdf (Pagina 29)

~ 29 ~

Power-ON Utilities

There are three power-ON utilities to set up and test printer hardware. These

utilities are activated by pressing the FEED button ( ) then turning on the printer

power ( ) simultaneously and release the button at different LED light

indications.

Power-ON Utility for standard panel

Follow the steps below for different power-on utilities.

1. Turn off the printer power switch.

2. Press down the FEED button ( ) then turn on the power switch ( ).

3. Release the power switch ( ) when LED color turns to amber,

continue pressing the FEED button.

4. The printer will beep twice, then release the FEED ( ) button when the

battery LED indicates the desired function:

Media sensor calibration

Follow the steps below to calibrate the media sensor.

1. Turn off the printer power switch.

2. Hold on the FEED button ( ) then turn on the power switch ( ).

3. Release the power switch ( ) when LED color turn on amber,

continue pressing the FEED button.

4. The printer will beep twice, then release the FEED ( ) button when the

battery LED indicates and blinking. The LED will sequence right

to left, 5 blinks each.

5. The printer will calibrate the sensor and print out the internal settings,

then enter the DUMP mode. Turn the printer OFF/ON to exit DUMP

mode.

(No LCD Display)

Printer initialization

Media sensor

calibration, self- test

and enter DUMP

Mode

Media sensor

calibration

Release FEED

button for

different functions

LED

(5 blinks)

Power ON Utilities

Standard Panel

Battery LED Configurations

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 61 62

Sin comentarios

AMT Datasouth Fastmark M4 Series Guía de usuario Pagina 29