AMT Datasouth Accel-7450 Manual de usuario descargar pdf (Pagina 14)

ACCEL-7450

Horizontal Print Registration

Scope:

This adjustment is used to align adjacent lines of print horizontally.

Required materials:

 Cut-sheet paper, or pin feed paper

Procedure:

1. Select control panel AUTO print gap, and Cut Sheet modes. Tractor mode

and pin feed paper is optional.

2. With the printer power turned OFF, press and hold the ENTER and RLF keys

while turning ON the printer power switch. Hold keys until printer initialization

(carriage movement) is completed. The printer is now in “HORIZONTAL ADJ”

mode, the current numeric setting is displayed on the LCD.

3. Load a cut-sheet paper landscape ( ) into the printer.

4. Press the ENTER key to print MODE 0, “H” pattern.

5. Review “H” pattern to determine required +/- alignment.

Print Example:

6. Press SPEED or TEAR OFF key to align print horizontally (+/-).

7. Press ENTER to select and print new adjustment.

8. Repeat steps to achieve print line alignment.

9. Press EJECT/LOAD to select next print mode.

10. Repeat above steps for each print pitch mode (MODE 0~4).

END OF PROCEDURE

HHHHHHHHHHHHHHHHHHHH

Alignment Required

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sin comentarios

AMT Datasouth Accel-7450 Manual de usuario Pagina 14